Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 498)

2. Click Get Information... on Main tab
The Paper Information on Printer dialog box appears.
3. Select the paper source
From Paper Source , check the setting or select a new paper source.
The current printer settings appear in Media Type and Roll Width .
4. Apply settings
To apply the printer settings to the printer driver, click OK .
Note
• If the media type and the output paper size are not set on the printer, OK will be grayed out and
cannot be clicked.
• If communication with the printer is disabled, the Get Information... does not appear or printer
media information from the printer cannot be obtained.
498