Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 473)

Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow these steps to load and print on rolls.
Note
• For details on roll paper sizes and types that can be used, see " Paper Sizes " or "Paper Information
List".
• To wait until the ink dries after printing before cutting the roll, set Drying Time in the printer driver. (See
" Specifying the Ink Drying Time for Rolls .")
• Once you have used all the paper on a roll, clean the platen. If the platen inside the top cover becomes
dirty, it may soil the underside of paper. (See " Cleaning Inside the Top Cover .").
1. Turn the printer on. (See " Turning the Printer On and Off .")
2. Load a roll on the roll holder. (See " Loading Rolls on the Roll Holder .")
3. Load the Roll Media in the printer. (See " Loading Rolls in the Printer ")
473