Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit - Manual (Page 269)

Default Network Settings
LAN Connection Defaults
Item Default
Enable/Disable LAN Wired LAN enabled
Network name (SSID) BJNPSETUP
Communication mode Infrastructure
Wi-Fi security Disable
IP address ( IPv4 ) DHCP
IP address ( IPv6 ) Auto setup
Set printer name * XXXXXXXXXXXX
Enable/disable IPv6 Enable
Enable/disable WSD Disable
Timeout setting 15 minutes
Enable/disable Bonjour Enable
Service name Canon TA-20
LPR protocol setting Enable
Wi-Fi DRX setting Enable
Wired LAN DRX setting Enable
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item Default
Network (SSID)/device name DIRECT-abXX-TA-20 *1
Password YYYYYYYYYY *2
Wi-Fi security WPA2-PSK (AES)
Connection request confirmation Displayed
*1 "ab" is specified at random and "XX" represents last two digits of printer's wireless MAC address.
269