Checking wi-fi network status – Canon imagePROGRAF TA-20 MFP 24" Large Format Printer with L24ei Scanner and Stand Kit User Manual
Page 322
Checking Wi-Fi Network Status
Follow the procedure below to check the wireless network status (signal strength) between the printer and
computer.
If anything is wrong with the Wi-Fi connection, check the network status from this menu.
1.
Start up IJ Network Device Setup Utility.
2.
Check the displayed message and select
Yes
.
3.
Select
Printer Network Setup
on the displayed screen.
Detected printers are listed.
4.
Select printer to check wireless network status from printer list.
Select the printer with
Available
displayed on
Status
.
5.
Select
Check Wireless Communication Status
on
View
menu.
The
Confirm Printer Password
screen appears.
For more on the password, refer to Administrator Password.
6.
Enter password and click
OK
.
• If the printer is connected to the computer with a wireless router:
The screen below appears.
• If the printer is connected to the computer using Wireless Direct:
The screen below appears.
Clicking
Update
measures the signal strength again.
322