Allen & Heath CQ-20B Ultracompact 20-Channel Digital Mixer (Rackmount/Stagebox) User Manual
Page 55
55
User Guide
V1.1.0
Issue 1
To Playback Multitrack from an SD Card
1.
Go to
CONFIG
/
Digital Audio
(Symbols)
/
USB/SD
to set up the connection.
2.
Select the
Sample Rate
. This should match the
Sample Rate of recording.
3.
On the CQ, go to
CONFIG
/
INPUTS
and select
the channels to use for playback. Use Multi
Select to select multiple inputs at the same time.
Recorded audio will play back to the channel it
was recorded from.
4.
Switch
Input Source
to
USB/SD
(Symbols).
5.
Go to
HOME
/
RECORD
/
Multitrack
6.
To select a stored multitrack file from the SD
Card, touch the
Select Track
drop-down menu at
the left bottom corner of the screen.
7.
If a recording cannot be seen, try a different
sample rate (steps 1 and 2).
8.
Use
Playback Mode
to select whether some, all
or none of the recordings will be repeated.
9.
Use the Transport bar to control playback.