Config command, Config, Command – HP 2/8q Fibre Channel User Manual

Page 119: Authority syntax keywords

Advertising
background image

Command Line Interface

119

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

DELETE [ALIAS]

Deletes the specified alias given by [alias] from the zoning database. If the alias is a
member of the active zone set, the alias will not be removed from the active zone set
until the active zone set is deactivated.

LIST

Displays a list of all aliases. This keyword does not require an admin session.

MEMBERS [ALIAS]

Displays all members of the alias given by [alias]. This keyword does not require an
admin session.

REMOVE [ALIAS] [MEMBER_LIST]

Removes the ports/devices given by [member_list] from the alias given by [alias]. Use
a <space> to delimit ports/devices in [member_list]. A port/device in [member_list]
can have any of the following formats:

— Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be

1–-239; port numbers can be 0–-255.

— 6-character hexadecimal device Fibre Channel address (hex)

— 16-character hexadecimal worldwide port name (WWPN) for the device with the

format xx:xx:xx:xx:xx:xx:xx:xx.

RENAME [ALIAS_OLD] [ALIAS_NEW]

Renames the alias given by [alias_old] to the alias given by [alias_new].

Config

command

Manages the Fibre Channel configurations on a switch. For information about setting the port
and switch configurations, refer to the “

Set Config command

” on page 137.

Authority

Admin session for all keywords except

Backup

and

List

.

Syntax

config

Keywords

ACTIVATE [config_name]

Activates the configuration given by [config_name]. If you omit [config_name], the
currently active configuration is used. Only one configuration can be active at a time.

BACKUP

Creates a file named

configdata

, which contains the system configuration

information. To download this file, open an FTP session, log in with account
name/password of

images

for both, and type

get configdata

. See “

Backing up

a switch configuration

” on page 114. This keyword does not require an Admin

session.

CANCEL

Terminates the current configuration edit session without saving changes that were
made.

Advertising
This manual is related to the following products: