HP 2/8q Fibre Channel - Manual (Page 163)

Command Line Interface
163 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Show Log
command
Displays the contents of the log or the parameters used to create and display entries in the log.
The log contains a maximum of 1200 entries. When the log reaches its entry capacity,
subsequent entries overwrite the existing entries, beginning with the oldest.
Authority
None
Syntax
SHOW LOG
Keywords
[number of events]
Specifies the number of the most recent events to display from the event log. [number
of events] must be a positive integer.
COMPONENTS
Displays the components currently being monitored for events. The components are as
follows:
Mgmtserver —Management server events
Nameserver —Name server events
Port —Port events
SNMP —SNMP events.
Switch —Switch management events.
Zoning —Zoning conflict events.
DISPLAY [filter]
Displays log events on the screen according to the component or severity level filter
given by [filter]. [filter] can be one of the following:
Info —Displays all informative events.
Warning —Displays all warning events.
Critical —Displays all critical events.
Eport —Displays all events related to E_Ports.
Mgmtserver —Displays all events related to the management server.
Nameserver —Displays all events related to the name server.
Port [port_number]—Displays all events related to the port given by [port_number].
SNMP —Displays all events related to SNMP.
Switch —Displays all events related to switch management.
Zoning —Displays all events related to zoning.
level
Displays the event severity level logging setting and the display level setting.
options