Show perf command, Show perf, Authority syntax keywords – HP 2/8q Fibre Channel User Manual
Page 165: Command, Ports. see the
Command Line Interface
165
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
[333][day month date time year][I][Eport Port: 0/8][Sending LSU oxid=0xc:type=1]
[334][day month date time year][I][Eport Port: 0/8][Send Zone Merge Request]
[335][day month date time year][I][Eport Port: 0/8][LSDB Xchg timer set]
[336][day month date time year][I][Eport Port: 0/8][Setting attribute
Oper.UserPort.0.8.EpConnState Connected]
Show Perf
command
Displays port performance in frames/second and bytes/second. If you omit the keyword, the
command displays data transmitted (out), data received (in), and total data transmitted and
received in frames/second and bytes per second.
Authority
None
Syntax
SHOW PERF
Keywords
BYTE
Displays continuous performance data in total bytes/second transmitted and received
for all ports. Enter
q
to stop the display.
INBYTE
Displays continuous performance data in bytes/second received for all ports. Type
q
and press Enter to stop the display.
OUTBYTE
Displays continuous performance data in bytes/second transmitted for all ports. Enter
q
to stop the display.
FRAME
Displays continuous performance data in total frames/second transmitted and received
for all ports. Enter
q
to stop the display.
INFRAME
Displays continuous performance data in frames/second received for all ports. Enter
q
to stop the display.
OUTFRAME
Displays continuous performance data in frames/second transmitted for all ports.
Enter
q
to stop the display.
ERRORS
Displays continuous error counts for all ports. Enter
q
to stop the display.