HP 2/8q Fibre Channel - Manual (Page 162)

Command Line Interface
162 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
The following is an example of the Show Config Threshold command:
2/8q FC Switch #> show config threshold
Configuration Name: default
------------
Threshold Configuration Information
-----------------------------------
ThresholdMonitoringEnabled False
CRCErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 1
SampleWindow 10
DecodeErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 0
SampleWindow 10
LoginMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LogoutMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LOSMonitoringEnabled True
RisingTrigger 100
FallingTrigger 5
SampleWindow 10
The following is an example of the Show Config Zoning command:
2/8q FC Switch #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
InteropAutoSave True
Default Visibility All