HP 2/8q Fibre Channel - Manual (Page 164)

Command Line Interface
164 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Displays the options that are available for configuring event logging and automatic
display to the screen. See the “
Set Log Command ” on page 144 for information about
how to configure event logging and display level.
port
Displays the ports being monitored for events. If an event occurs which is of the
defined level and on a defined component, but not on a defined port, no entry is made
in the log.
settings
Displays the current filter settings for component, severity level, port, and display
level. This command is equivalent to executing the following commands separately:
Show Log Component , Show Log Level , and Show Log Port .
Examples
The following is an example of the Show Log Component command:
2/8q FC Switch #> show log component
Current settings for log
------------------------
FilterComponent NameServer MgmtServer Zoning Switch Blade Port Eport Snmp
The following is an example of the Show Log Level command:
2/8q FC Switch #> show log level
Current settings for log
------------------------
FilterLevel Info
DisplayLevel Critical
The following is an example of the Show Log Options command:
2/8q FC Switch #> show log options
Allowed options for log
-----------------------
FilterComponent
All,None,NameServer,MgmtServer,Zoning,Switch,Blade,Port,Eport,Snmp
FilterLevel Critical,Warn,Info,None
DisplayLevel Critical,Warn,Info,None
The following is an example of the Show Log command:
2/8q FC Switch #> show log
[327][day month date time year][I][Eport Port:0/8][Eport State=
E_A0_GET_DOMAIN_ID]
[328][day month date time year][I][Eport Port: 0/8][FSPF PortUp state=0]
[329][day month date time year][I][Eport Port: 0/8][Sending init hello]
[330][day month date time year][I][Eport Port: 0/8][Processing EFP, oxid= 0x8]
[331][day month date time year][I][Eport Port: 0/8][Eport State = E_A2_IDLE]
[332][day month date time year][I][Eport Port: 0/8][EFP,WWN= 0x100000c0dd00b845,
len= 0x30]