Quit command, Reset command, Quit – HP 2/8q Fibre Channel User Manual
Page 131: Authority syntax notes, Reset, Command, Authority syntax, To the
Command Line Interface
131
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
346 327 0.8 00:35:12 3-01:18:35 util
347 327 0.0 00:00:29 3-01:18:35 snmpservicepath
348 327 0.0 00:02:46 3-01:18:34 eport
349 327 0.0 00:00:21 3-01:18:34 PortApp
350 327 5.6 04:08:24 3-01:18:34 port_mon
351 327 0.0 00:01:38 3-01:18:34 zoning
352 327 0.0 00:00:01 3-01:18:34 diagApp
404 327 0.0 00:00:04 3-01:18:27 snmpd
405 327 0.0 00:00:02 3-01:18:27 snmpmain
406 405 0.0 00:00:00 3-01:18:26 snmpmain
Quit
command
Closes the Telnet session.
Authority
None
Syntax
QUIT
or
EXIT
or
LOGOUT
Notes
You can also press Ctrl+D to close the Telnet session.
Reset
command
Resets the switch configuration parameters. If you omit the keyword, the default is the
Reset
Switch
command.
Authority
Admin
Syntax
RESET