HP 2/8q Fibre Channel User Manual

Page 83

Advertising
background image

Switch Manager

83

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

FBusy

Number of class 3 fabric busy (F_BSY) frames generated by this port

in response to incoming frames. This usually indicates a busy condition

on the fabric or N_port that is preventing delivery of this frame.

Flow Errors

Number of times a frame is received and all the switch ports receive

buffers are full. The normal Fabric Login exchange of flow control

credit should prevent this from occurring. The frame is discarded.

FReject

Number of frames, from devices, that have been rejected. Frames can

be rejected for any of a large number of reasons.

Invalid CRC

Number of invalid Cyclic Redundancy Check (CRC) frames detected.

Invalid Destination

Address

Number of address identifier (S_ID, D_ID) errors. AL_PA equals

non-zero AL_PA found on F_Port.

Link Failures

Number of optical link failures detected by this port. A link failure is a

loss of synchronization or by loss of signal while not in the offline

state. A loss of signal causes the switch to attempt to re-establish the

link. If the link is not re-established, a link failure is counted. A link

reset is performed after a link failure.

LIP (AL_PD,AL_PS)

Number of F7, AL_PS LIPs, or AL_PD (vendor specific) resets

performed.

LIP(f7,AL_PS)

Used to reinitialize the loop. An L_port, identified by AL_PS, may have

noticed a performance degradation and is trying to restore the loop.

LIP(f7,f7)

A loop initialization primitive frame used to acquire an AL_PA.

LIP(f8,AL_PS)

Denotes a loop failure detected by the L_port identified by AL_PS.

Login Count

Number of device logins that have occurred on the switch.

Logout Count

Number of device logouts that have occurred on the switch.

Loop Timeouts

Number of loop timeouts.

Loss Of Sync

Number of synchronization losses (>100 ms) detected by this port. A

loss of synchronization is detected by receipt of an invalid

transmission word.

Primitive Sequence

Errors

Number of bad primitives received by the port.

Rx Link Resets

Number of link reset primitives received from an attached device.

Rx Offline Sequences

Number of offline sequence primitives received by the port.

Total Errors

Total number of primitive and non-primitive port link errors.

Total Link Resets

Number of link-reset primitives the transmitted by the port.

Total LIPs Received

Number of loop initialization primitive frames received.

Total LIPs Transmitted

Number of loop initialization primitive frames transmitted.

Tx Offline Sequences

Number of offline primitives transmitted by the port.

Total Rx Frames

Total number of frames received by the port.

Total Rx Words

Total number of words received by the port.

Total Tx Frames

Total number of frames transmitted by the port.

Total Tx Words

Total number of words transmitted by the port.

Tx Link Resets

Number of link reset primitives sent from this port to an attached port.

Total Offline

Sequences

Total number of offline sequences transmitted and received by the

port.

Table 23: Port Statistics data window entries (Continued)

Entry

Description

Advertising
This manual is related to the following products: