HP 2/8q Fibre Channel - Manual (Page 175)

Command Line Interface
175 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
REMOVE [zone] [member_list]
Removes the ports/devices given by [member_list] from the zone given by [zone].
Use a <space> to delimit aliases and ports/devices in [member_list]. [member_list]
can have any of the following formats:
— Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be
1-239; port numbers can be 0-255.
— 6-character hexadecimal device Fibre Channel address (hex)
— 16-character hexadecimal worldwide port name (WWPN) with the format
xx:xx:xx:xx:xx:xx:xx:xx.
— Alias name
RENAME [zone_old] [zone_new]
Renames the zone given by [zone_old] to the zone given by [zone_new].
TYPE [zone] [zone_type]
Specifies the zone type given by [zone_type] to be assigned to the zone name given by
[zone]. If you omit the [zone_type], the system displays the zone type for the zone
given by [zone]. [zone_type] can be one of the following:
soft —name server zone
hardACL —Access control list hard zone. This keyword is case sensitive.
ZONESETS [zone]
Displays all zone sets of which the zone given by [zone] is a component. This
keyword does not require an Admin session.
Examples
The following is an example of the Zone List command:
2/8q FC Switch #> zone list
Zone ZoneSet
-------------------
wwn_b0241f
zone_set_1
wwn_23bd31
zone_set_1
wwn_221416
zone_set_1
wwn_2215c3
zone_set_1
wwn_0160ed
zone_set_1