HP 2/8q Fibre Channel - Manual (Page 166)

Command Line Interface
166 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Examples
The following is an example of the Show Perf command:
2/8q FC Switch #> show perf
Port Bytes/s Bytes/s Bytes/s Frames/s Frames/s Frames/s
Number (in) (out) (total) (in) (out) (total)
------ ------- ------- ------- -------- -------- --------
0 7K 136M 136M 245 68K 68K
1 58K 0 58K 1K 0 1K
2 0 0 0 0 0 0
3 0 0 0 0 0 0
4 0 0 0 0 0 0
5 0 0 0 0 0 0
6 0 7K 7K 0 245 245
7 136M 58K 136M 68K 1K 70K
The following is an example of the Show Perf Byte command:
2/8q FC Switch $> show perf byte
Displaying bytes/sec data... (Press 'q' and the ENTER key to stop display)
0 1 2 3 4 5 6 7
-----------------------------------------------------------------------------
76M 0 0 32M 0 0 0 43M
78M 0 0 34M 0 0 0 43M
78M 0 0 34M 0 0 0 43M
77M 0 0 33M 0 0 0 44M
77M 0 0 33M 0 0 0 44M
84M 0 0 40M 0 0 0 43M
83M 0 0 39M 0 0 0 43M
80M 0 0 35M 0 0 0 45M
77M 0 0 33M 0 0 0 44M
78M 0 0 33M 0 0 0 44M
75M 0 0 29M 0 0 0 45M
74M 0 0 28M 0 0 0 46M
q
Show Setup
command
Displays the current SNMP and system settings.
Authority
None
Syntax
SHOW SETUP