HP 2/8q Fibre Channel - Manual (Page 98)

Switch Manager
98 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
Network Properties dialog box messages
The maximum number of management
sessions on the entry switch has been
exceeded.
The application cannot establish a session with
the fabric because too many sessions are
already open. Close any other application or
Telnet sessions to the fabric and try again.
Unable to login to switch. Reason: … Verify that the user name and password
entered in the dialog box are valid login
information for an account on the switch
specified by the IP address box.
Unknown host hostname . Verify that the host name specified for the IP
address is a valid hostname for a switch in the
fabric, and that the switch is reachable from
the user’s workstation.
Verify correct user name and password and
retry.
Either the user name or password is incorrect.
Enter the correct values and retry.
Table 29: Add a Fabric messages (Continued)
Message User action
Table 30: Network Properties dialog box messages
Message User action
Attempt to change snmp community strings
failed.
or
Attempt to change syslog configuration failed.
Verify that the data is valid, that the user has
permissions to modify the configuration on the
switch, that the switch is reachable in the
fabric, and that the fabric is reachable from
the user’s workstation, and then retry the
configuration change.
Unable to apply invalid syslog host address. Verify that either a syntactically correct IP
address was specified for the syslog host, or
that a host name was specified for a valid
syslog host that is reachable from the user’s
workstation.