Notes examples – HP 2/8q Fibre Channel User Manual

Page 177

Advertising
background image

Command Line Interface

177

HP StorageWorks 2/8q Fibre Channel Switch Management User Guide

ACTIVE

Displays the name of the active zone set. This keyword does not require Admin
session.

ADD[zone_set] [zone_list]

Adds a list of zones and aliases given by [zone_list] to the zone set given by
[zone_set]. Use a <space> to delimit zone and alias names in [zone_list].

COPY [zone_set_source] [zone_set_destination]

Creates a new zone set named [zone_set_destination] and copies into it the zones from
the zone set given by [zone_set_source].

CREATE [zone_set]

Creates the zone set with the name given by [zone_set]. A zone set name must begin
with a letter and be no longer than 64 characters. Valid characters are 0-9, A-Z, a-z, _,
$, ^, and -. The zoning database supports a maximum of 256 zone sets.

DEACTIVATE

Deactivates the active zone set. Close the Zoning Edit session before using this
keyword.

DELETE[zone_set]

Deletes the zone set given by [zone_set]. If the specified zone set is active, the
command is suspended until the zone set is deactivated.

LIST

Displays a list of all zone sets. This keyword does not require an Admin session.

REMOVE[zone_set] [zone_list]

Removes a list of zones given by [zone_list] from the zone set given by [zone_set].
Use a <space> to delimit zone names in [zone_list]. If [zone_set] is the active zone
set, the zone will not be removed until the zone set has been deactivated.

RENAME [zone_set_old] [zone_set_new]

Renames the zone set given by [zone_set_old] to the name given by [zone_set_new].
You can rename the active zone set.

ZONES [zone_set]

Displays all zones that are components of the zone set given by [zone_set]. This
keyword does not require an Admin session.

Notes

A zone set must be active for its definitions to be applied to the fabric.

Only one zone set can be active at one time.

A zone can be a component of more than one zone set.

Examples

The following is an example of the

Zoneset Active

command:

2/8q FC Switch #> zoneset active

ActiveZoneSet Bets

LastActivatedBy admin@OB-session6

LastActivatedOn day month date time year

Advertising
This manual is related to the following products: