HP 2/8q Fibre Channel - Manual (Page 129)

Command Line Interface
129 HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
13. A message prompts you to reset the switch to activate the firmware.
Enter the hotreset command to perform a non-disruptive firmware activation.
2/8q FC Switch (admin) $>hotreset
Lip
command
Reinitializes the specified loop port.
Authority
Admin
Syntax
LIP [PORT_NUMBER]
Keywords
[PORT_NUMBER]
The number of the port to be reinitialized.
Examples
2/8q FC Switch (admin) #> lip 2
Passwd
command
Changes a user account’s password.
Authority
Admin account name and an admin session to change another account’s password; you
can change you own password without an Admin session.
Syntax
PASSWD [ACCOUNT_NAME]
Keywords
[ACCOUNT_NAME]
The user account name. To change the password for an account name other than your
own, you must open an admin session with the account name Admin. If you omit
[account_name], you are prompted to change the password for the current account
name.
Examples
2/8q FC Switch (admin) #> passwd user2
Press 'q' and the ENTER key to abort this command.
account OLD password : ********
account NEW password (4-20 chars) : ********
please confirm account NEW password: ********
password has been changed.