Maxim Integrated DS21Q55 User Manual
Page 181
Product Preview
DS21Q55
181 of 248
012103
Please contact
or search
http://www.maxim-ic.com
for updated
information.
Register Name:
SR9
Register Description:
Status Register 9
Register Address:
26h
Bit #
7
6
5
4
3
2
1
0
Name
-
BBED
BBCO
BEC0
BRA1
BRA0
BRLOS
BSYNC
Default
0
0
0
0
0
0
0
0
Bit 0/BERT in Synchronization Condition (BSYNC). Will be set when the incoming pattern matches for 32 consecutive bit
positions. Refer to BSYNC in INFO2 register for a real-time version of this bit.
Bit 1/BERT Receive Loss Of Synchronization Condition (BRLOS). A latched bit that is set whenever the receive BERT
begins searching for a pattern. The BERT will lose sync after receiving six errored bits out of 63 bits. Synchronization is lost
when six errors are received in 63 bits. Once synchronization is achieved, this bit will remain set until read.
Bit 2/BERT Receive All Zeros Condition (BRA0). A latched bit that is set when 32 consecutive zeros are received. Allowed
to be cleared once a one is received.
Bit 3/BERT Receive All Ones Condition (BRA1). A latched bit that is set when 32 consecutive ones are received. Allowed
to be cleared once a zero is received.
Bit 4/BERT Error Counter Overflow (BECO) Event (BECO). A latched bit that is set when the 24-bit BERT error counter
(BEC) overflows. Cleared when read and will not be set again until another overflow occurs.
Bit 5/BERT Bit Counter Overflow Event (BBCO). A latched bit that is set when the 32-bit BERT bit counter (BBC)
overflows. Cleared when read and will not be set again until another overflow occurs.
Bit 6/BERT Bit Error Detected (BED) Event (BBED). A latched bit that is set when a bit error is detected. The receive
BERT must be in synchronization for it detect bit errors. Cleared when read.