MITSUBISHI ELECTRIC Merservo MR-J2S- B - Manual (Page 32)

1 - 15
1. FUNCTIONS AND CONFIGURATION
(3) For MR-J2S-700B
Front cover socket
(2 places)
A)
1)
Removal of the front cover Reinstallation of the front cover
1) Insert the two front cover hooks at the bottom into the
sockets of the servo amplifier.
2) Press the front cover against the servo amplifier until the
removing knob clicks. 1) Push the removing knob A) or B), and put you
finger into the front hole of the front cover.
2) Pull the front cover toward you.
A)
2)
B)
2)
1)
Front cover
hook
(2 places)
(4) For MR-J2S-11KB or more
Mounting screws (2 places)
1) Remove the front cover mounting screws (2 places)
and remove the front cover.
Removal of the front cover
Mounting screws
(2 places)
2) Remove the front cover mounting screws (2 places).
3) Remove the front cover by drawing it in the direction of arrow.