Mitel SX-2000 - Manual (Page 160)

SX-200 General Information Guide
146 Revision A 50003510
Data: Auto Answer
This feature supports automatic answering destination data devices. When the destination data
device detects ringing, it answers, then signals to the calling device that it is ready to receive
data.
Data: Automatic Data Route Selection (ADRS)
Outgoing trunk data calls are processed by the same Automatic Route Selection (ARS) system
as voice trunk calls. See Automatic Route Selection.
Data: Hunt Groups
Datasets can be assigned to a Data Hunt Group. The system supports both Terminal and
Circular hunting. See Hunt Groups.
Data: Modem Pooling
Modem Pooling is a data application feature using voice communication lines. Modem pooling
permits communication between modems and DATASET 2100 Series datasets. Each pooled
modem consists of a modem and a dataset. The dataset connects to a Digital Line Circuit, and
communicates with datasets within the system. The pooled modem connects to an ONS or
OPS Line Circuit, which communicates directly with internal modems, or with external modems
via trunks.
Data: Modem Pooling Queuing
Modem Pooling callers who encounter a busy modem pool hunt group, destination dataset,
data hunt group, or trunk group can queue for it.
Data: Peripherals
The system supports several different data devices; and provides several data support devices
for use with data devices.
Mitel Networks data devices are proprietary limited-distance modems that provide data facilities
for terminals, digital SUPERSET telephones, and other types of data devices. These data sets
serve as the interface between the DNIC circuit in the PBX, and the data devices connected
to the system, transmitting data and control signals over a single twisted pair of wires. The
datasets are available in two series - DATASET 1100 series and DATASET 2100 series.
DATASET 1103 Standalone supports asynchronous data communications at rates from 110
bps to 19.2 kbps. The data sets are RS-232C compatible, provide end-to-end error correction,
auto-baud detection and auto-parity generation.
The DATASET 1100 series is available in two options:
• DATASET 1103 Standalone
• MILINK Data Module.