Sx-200 ml system – Mitel SX-2000 User Manual
Page 21
Product Overview
50003510
Revision A
7
SX-200 ML System
The SX-200 ML system can support up to one peripheral bay or cabinet.
The SX-200 ML System has the following characteristics:
•
Main Control Card IIIML (MCCIIIML)
•
Bay Control Card II or Bay Control Card III, Bay Power Supply Card, and a Control Dual
FIM Carrier Card or a Control Triple CIM Card ( if expanding beyond the single cabinet)
•
ONS/CLASS Line card, LS/GS card, LS/CLASS Trunk card, Universal card, COV card,
DID card, OPS card, DNIC card, PRI card, BRI card, and T1 card
•
Maximum of 96 physical ports using a single cabinet
•
Maximum of one peripheral cabinet, SPINE bay or ISDN bay
•
Maximum of 192 physical ports with a peripheral bay
•
Requires LIGHTWARE 17 or greater software
The one peripheral bay can be a SX-200 peripheral cabinet, SX-200 LIGHT peripheral cabinet,
SPINE bay, or ISDN bay. The ISDN bay may be an ISDN Network Gateway or a PRI card.The
PRI card fits into a main control cabinet.