StorageTek 9840 - Manual (Page 160)

Menu Operations
6-4 Sixth Edition 95741
■
Menu Operations
Menu operations for Online and Offline are very similar. Online menus only
provide viewing of current settings and/or status. Offline menus allow option
selections and/or change to various settings. In both menu systems, press
Select
to toggle/increment options, or to answer “Yes”. Press Menu to advance to the
next menu, or to answer “No”.
Online Main Menu Operation
When the drive is Online, the main menus shown on Figure 6-3 on page 6-5
are active. With Online selected, press Menu (one or more times) to advance to
the View Configuration ( View CFG ? ) Main Menu, where you will have two
choices:
• Press Select (Yes) to view configuration submenus which display the
current drive configuration settings.
• Press Menu (No) to bypass, and advance to the next main menu.
Notes:
1. Fibre Channel interface drives provide for Port A and B Enable/
Disable selection before the View Configuration Main Menu
appears.
2. The View Configuration submenus vary slightly relative to specific
interface type.
The view-only Firmware Release Main Menu displays the drive’s firmware code
release level in the following format: Rx.yy.zzzc; where x = major revision level,
y = minor revision level, z = integration number, and c = channel interface
type (
f for Fibre Channel, and s for SCSI).
When a 9840 drive is installed in a CSL, the view-only CSL Firmware Release
Main Menu displays the CSL’s firmware code release level in the following
format: CSL x.y.zz; where x = major revision level, y = minor revision level, and
z = integration number.
CSL None is displayed when the drive is not installed
in a CSL.
The Main Exit Menu ( Exit Menu? ) allows choice of exiting menu system by
pressing Select (Yes); or, looping back to the Online/Offline Main Menu by
pressing Menu (No).