StorageTek 9840 - Manual (Page 70)

Desktop Units
3-20 Sixth Edition 95741
CSL Shipping Insert
Use the instructions below to remove the shipping insert from the CSL:
Note: See “Desktop Drive Shipping Insert” on page 3-19 to remove the
desktop drive shipping insert.
1. Locate the shipping insert within the feed channel.
2. Push the input bin bookend to right of the input bin and hold it in place.
3. Reach through the input bin and squeeze the shipping insert handle together.
Note: Squeezing the handle unlocks the shipping insert from the drive.
4. Slide the shipping insert out through the feed channel to the cartridge stop mechanism.
5. Push down on the cartridge stop mechanism and remove the shipping insert.
1. Feed channel
2. Shipping insert
3. Feed roller
4. Input bin
5. Cartridge stop mechanism
6. Store the shipping insert.
Note: The shipping insert should be installed in the drive whenever the CSL is returned to
StorageTek for any reason.
C53818
1
3
2
4
5