StorageTek 9840 - Manual (Page 187)

95741 Sixth Edition 6-31
SCSI Change Configuration Menu
Library Address Submenu
Lib Adr xy Defaults to last saved selection.
Pressing Select when both
characters are steady, starts the
change mode. The
x character
begins flashing and will
increment up, one value with
each additional press of
Select.
Pressing Menu sets flashing
character at displayed value (0-F),
and advances to the
y character.
For 9738 libraries, the addresses
of all drives stay at the factory
preset (FF).
1. Press Select to start change mode;
or, press Menu to bypass.
2. Press Select to increment
until desired value is displayed,
then press
Menu to set.
3. Repeat step 2 for y character.
4. Press Menu to advance to the next
submenu; or, press Select to
restart change mode.
Note: Manufacturing ships drive with Lib Adr FF selected.
CSL Power On Mode Submenu
CSL System
CSL Auto
CSL Manual
Defaults to last saved selection.
Selects the default operation of
the CSL when powering on:
• CSL System allows the host
to control the CSL.
• CSL Auto allows the CSL to
operate automatically.
• CSL Manual allows manual
operations only.
1. Press Menu to bypass, or
2. Press Select until desired option
is displayed; then, press Menu to
set and advance to next
submenu.
Note: Manufacturing ships drive with CSL Auto option selected.
Table 6-2. Menu Table—SCSI Configuration (Continued)
Options Notes Procedure