StorageTek 9840 - Manual (Page 184)

SCSI Change Configuration Menu
6-28 Sixth Edition 95741
SCSI Bus Speed Submenu
SCSI Ultra
SCSI Fast
SCSI Slow
Defaults to last saved selection.
Selects channel transmission
speed for the drive to match the
drive with the host capabilities.
Ultra = 40MB/s (16Bit width)
20MB/s ( 8Bit width)
Fast = 20MB/s (16Bit width)
10MB/s ( 8Bit width)
Slow = 10MB/s (16Bit width)
5MB/s ( 8Bit width)
1. Press Menu to bypass, or
2. Press Select until the desired
option is displayed; then, press
Menu to set, and advance to next
submenu.
Note: Manufacturing ships drive with the SCSI Ultra option selected.
SCSI Bus Width Submenu
SCSI 16Bit
SCSI 8Bit
Defaults to last saved selection.
Selects channel width for the
drive to match the drive with the
host configuration.
1. Press Menu to bypass, or
2. Press Select to toggle option;
then, press Menu to set, and
advance to next submenu.
Note: Manufacturing ships drive with the SCSI 16Bit option selected.
Tape Bar Submenu
Tape Bar Y
Tape Bar N
Selects a barchart that displays
how much tape is written and
how much tape has been read.
Deselects the barchart display.
See “Tape Bar” on page 1-14 for
additional information.
1. Press Menu to bypass, or
2. Press Select to toggle option;
then, press Menu to set, and
advance to the next submenu.
Note: Manufacturing ships drive with the Tape Bar N option selected
Language Selection Submenu
Language ? Selects display language:
English, Espanol, Francais,
Italiano, or Deutscher. 1. Press Menu to bypass, or
2. Press Select until desired option
is displayed; then, press Menu to
set, and advance to the next
submenu.
Note: Manufacturing ships drive with the English option selected
Table 6-2. Menu Table—SCSI Configuration (Continued)
Options Notes Procedure