StorageTek 9840 - Manual (Page 209)

95741 Sixth Edition 8-1
8 Servicing the Drive
This chapter provides servicing information for the 9840 Tape Drive. It contains:
• “Jammed Cartridge”
• “Clean Tape Path” on page 8-3
• “Clean Fibre Channel Components” on page 8-4
• “Fibre Channel Loop Test” on page 8-8
■
Jammed Cartridge
Note: Refer to Chapter 5, “Cartridge Scratch Loader” to remove a jammed
cartridge from a CSL.
A jammed cartridge in a 9840 Tape Drive is not a common malfunction.
However, you must know how to remove jammed cartridges when the
malfunction occurs.
Follow these instructions to remove a jammed cartridge from a drive.
1. Locate the MUD screw on the drive.
Note: The 9840 Tape Drive MUD screw is located on the right-front side of the drive (see
the figure below).
1. MUD screw
C53575
1