StorageTek 9840 User Manual
Page 65
Advertising
95741
Sixth Edition
3-15
9738 Library Attachment
10. Locate the grommets.
11. Slip a grommet over each installed FC cable.
12. Seat the grommet into the hole of the metal enclosure.
1. Grommets (2X)
13. Route the cable(s) to the hub or switch.
14. Remove the cable connector covers and clean the cable ends with wipes.
15. Connect the cable to an open port on the switch or hub.
16. Repeat Step 3 through Step 15, as applicable, for all other drives in the 9738 library.
17. Proceed to
“Apply Power to Library Drive” on page 3-18
if you are only installing FC
drives.
1. Fibre Channel cable
2. Fibre Channel GBIC
C53817
1
C53530
2
1
Advertising