StorageTek 9840 - Manual (Page 83)

95741 Sixth Edition 3-33
Rack
Install Slide Rails
Use the instructions below to install the slide rails on the rack:
1. Screws (2)
2. Nut plate
3. Captive Nuts
1. Loosely attach the slide bracket to the rear of the slide-rail assembly using two screws
and nut plate (see figure below).
Note: Do not fully tighten the screws. You must adjust the slide bracket to fit the slide
rail between the vertical frame members.
1. Slide bracket adjustment screws (2)
2. Nut plate
3. Slide rail
C53680
1
2
3
C53257
3
1
2