Paradyne 9128-II - Manual (Page 392)

Index
IN-6 April 2002 9128-A2-GB20-60
installation, 1-3
installation and setup
Network Health, 9-2
installing
Network Health, 9-2
user history files, 8-15
interface
DBM status, 5-38
status, 4-5
user, 2-1
Interface Status
Ethernet port, 3-97
Network, 3-47
Internal
Transmit Clock, 3-43
Inv SPID, Local Number, Call ID, 5-39
Inverse ARP, 1-3
Invert Transmit and Received Data, 3-45
Invert Transmit Clock, 3-43
IP
Address, 3-106
default destination, 3-78
node information, 3-77
ping test, 6-35
Routing Table, 1-6, 5-48
Validation
NMS, 3-90
IP Address, 3-81, 3-102, 3-105
distributing to other FrameSavers, 3-75
Ethernet port, 3-97
NMS number, 3-90, 3-92
Node, 3-77
IP address
validation, 3-79
IP addressing
limiting SNMP access, 4-11
IP Enabled
DLCI performance statistics, 5-58
DLCI Type, 3-68
SLV performance statistics, 5-54
IP SLV
availability traps, 3-96
ISDN
Active, 5-21
backup, 1-5
BRI DBM, 1-5
troubleshooting problems, 6-17
controlling access, 4-5
DBM connector, C-15
DBM operation, 5-71
Link Profile Invalid, 5-22, 6-8
Network Failed, 5-22, 6-8
ISDN (continued)
physical options, 3-49
PRI DBM, 1-5
setting up link profiles, 3-53
updating software, 5-77
verifying line, 5-73
K
keyboard keys, 2-6
keys
keyboard, 2-6
screen function, 2-5, 2-7
L
Lamp Test, 5-27, 6-40
LAN
adapter and cable, C-9
last reset, 5-19
latency, 1-8
round trip
setting threshold, 3-34
traps, 3-96
LEDs, 6-2, 6-14
9126 faceplate and screen, 5-5
9128 faceplate and screen, 5-7
and control leads
displaying, 5-4
descriptions, 5-8
limiting
async terminal access, 4-2
dial-in access, 4-4
FTP access, 4-7
SNMP access, 4-9
through IP addresses, 4-11
Telnet access, 4-6
Line
Build Out (LBO), 3-39, 3-51
Coding Format, 3-38, 3-47
Equalization, 3-48
Framing Format, 3-38, 3-47, 3-50
Loopback, 6-27
Status, 5-39
Line Loopback, 6-31, 6-33
Link
Destination, 3-72–3-73
frame relay statistics, 5-59
maximum ISDN rate, 3-54
Name, 3-53
Operating Mode, 5-40
Profile Disabled, 5-22, 6-8
Protocol, 3-103, 3-105