Panasonic AV-HS450N - Manual (Page 112)

112
4. Input/output signal settings
4-3. Setting the output signals
OUT1 to OUT4 are SDI signal outputs.
OUT5 and OUT6 are DVI-D signal outputs.
OUT A1, OUT A2, OUT B1 and OUT B2 can be set only when one of the following option boards has been
connected.
 AV-HS04M4 (Analog Output Board)
 AV-HS04M5 (DVI/Analog Output Board)
 AV-HS04M7 (SDI Output Board)
<List of settings by output signal>
Output connector
Setting menu and numbers of sections in this
manual
Asign
DVIOut
(Dig)
DVIOut
(Ana)
DownCnv
4-3-1 4-4 4-4 4-5
OUT1 to OUT4
Standard
SDI output 4 lines
 — — —
OUT5, OUT6
Standard
DVI-D output 2 lines
  — —
Option slot
OUT A1,
OUT A2,
OUT B1,
OUT B2
AV-HS04M4
Analog component output 2 lines
 — — —
AV-HS04M5
DVI-I output 1 line
Analog component output 1 line
   —
AV-HS04M7
SDI output 2 lines
 — — 
: Can be set.
—: Cannot be set.