Panasonic AV-HS450N - Manual (Page 125)

125
4. Input/output signal settings
4-8-2. Setting the split frame and characters
Set the frame, character brightness and background of the split screens to be displayed on the multi view display.
Press the [MV] button to light its indicator and display the MV menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to select the MV1 Frame or MV2 Frame sub menu depending on the multi view output signals to
be set.
<Menu display>
MV 2|Frame | Char|Label |Tally
MV1Frame| LUM75%| LUM75%| On|Red+GRN
LUM 0%
LUM25%
LUM50%
LUM100%
Off LUM 0%
LUM25%
LUM50%
LUM100%
Off Off Red
Off
MV 4|Frame | Char|Label |Tally
MV2Frame| LUM75%| LUM75%| On|Red+GRN
LUM 0%
LUM25%
LUM50%
LUM100%
Off LUM 0%
LUM25%
LUM50%
LUM100%
Off Off Red
Off
Turn [F2] to set the split frame brightness and split frame display using the Frame item.
LUM (0%, 25%, 50%, 75%, 100%):
Select one of these settings for the brightness of the split frame (gray scale).
Off: The split frame is not displayed.
Turn [F3] to set the character brightness and character display using the Char item.
LUM (0%, 25%, 50%, 75%, 100%):
Select one of these character (gray scale) brightness settings.
 The “!” mark appears in front of the name of the material when no signals are input or signals with
a different format are input.
 When signals amenable to camera control have been input, the “c” mark is displayed in front of
the name of the material.
 When the input signal is frozen, the “F” mark is displayed in front of the name of the material.
 When the “!” mark is displayed, the “c” mark will not be displayed.
 When the “F” mark is displayed, the “!” mark and the “c” mark are not displayed.
Off: The characters are not displayed. Neither is the character background shown.
Turn [F4] to set whether the character background (half-tone) is to be displayed using the Label item.
On: The character background is displayed.
Off: The character background is not displayed.