Panasonic AV-HS450N - Manual (Page 176)

176
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
CONFIG CONFIG 1 Parameter BusMode LCD-BL MENUDLG
Operate Setting range A/B,
PGM/PST On, Off, 60, 120,
180 On, Off
Default value PGM/PST On On
CONFIG 2 Parameter LEDMode
SHOT MEM Setting range AW, AV
Default value AV
CONFIG 3 Parameter ENBL
SYSCONF Setting range Enable, Disable
(When Disable
is selected, the
system menu is
locked.)
Default value Disable
CONFIG 4 Parameter Port Assign GPIEN
GPIM-In Setting range Port1 to 8 AUTO, CUT,
DSK1, DSK2,
PinP1, PinP2,
FTB, BGDAUTO,
BGDCUT,
KEYAUTO,
KEYCUT,
RTlyDBL,
GTlyDBL,
NoAsign Enable, Disable
Default value — NoAsign Enable
CONFIG 5 Parameter Port Assign GPIEN
GPIM-Out Setting range Port1 to 31 AUTO, CUT,
DSK1ON,
DSK2ON,
PinP1ON,
PinP2ON,
FTBON,
BGDAUTO,
BGDCUT,
KEYAUTO,
KEYCUT,
DSK1TRN,
DSK2TRN,
PinP1TR,
PinP2TR,
FTBTRN, KEYON,
KEYTRN,
R-Tly1 to 20,
G-Tly1 to 20,
NoAsign Enable, Disable
Default value — NoAsign Disable
8. Setting menu table