Panasonic AV-HS450N - Manual (Page 124)

124
4. Input/output signal settings
Press the [MV] button to light its indicator and display the MV menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to select the MV1 PATT or MV2 PATT sub menu depending on the multi view output signals to be
set.
<Menu display>
MV 1|Split | |Pos |Signal
MV1 PATT|10Split| | 1|PGM
16Split
9Split
4Split 1~10 IN1~16
IN-A1
IN-A2
IN-B1
IN-B2
CBGD
FMEM1~4
PVW
KeyOut
AUX1~4
Turn [F2] to set the split-screen display mode using the Split item.
Turn [F4] to set the subscreens ( to ) using the Pos item.
Turn [F4] to set the names of the signals to be displayed on the subscreens using the Signal item.
 When AUX1 to AUX4 have been selected, the signal names listed below will be displayed on the LCD for the
signals selected as the AUX output signals.
 Refer to “3-9-1. Selecting the AUX output materials”.
Name of signal Display on LCD Name of signal Display on LCD
IN1 to 20
PGM
PVW
CLN
MV1, MV2 [IN1] to [IN20]
[PGM]
[PVW]
[CLN]
[MV1], [MV2] KeyOut
FMEM1 to 4
CBGD
CBAR [KeyOut]
[FM1] to [FM4]
[CBG]
[BAR]
 If, when AUX2 to AUX4 have been selected, the multi view display output (MV1 or MV2) is selected for the
AUX bus (AUX2, AUX3, AUX4) output signal, the images of the AUX bus displayed on the subscreens of the
multi view display will be black images.