Panasonic AV-HS450N - Manual (Page 146)

146
5. System settings
Example of connections (when the unit and a pan-tilt head are connected)
Pan-tilt heads that can be connected: AW-HE100N, AW-PH400P, AW-PH405N, AW-PH360N
 Connections for AW-HE100N, AW-PH405N or AW-PH360N
IN2 SIGNAL GND REF EDITOR
COM TALLY/GPI PANEL LAN
2 3 4 5 6
3 2 1 4 5 6 7 8 9 10 11 12 13 14 15 16 C/C
U/C
1 SDI OUTPUTS
SDI INPUTS
DVI-D OUTPUTS
IN/OUT B2 IN/OUT B1 SLOT B IN/OUT A2 IN/OUT A1 SLOT A
Pr Pb Y Pr Pb Y ANALOG INPUTS
CONTROLLER connector
Cable length: Max. 656 ft. (200 m)
Twisted pair cable (AWG24)
AV-HS450N
AW-HE100N
Analog component signals
(For the connection specifi cations, refer to the
Operating Instructions of the AW-HE100N.)
Analog Input Board
COM connector
<Connection specifications>
 
1 FRAME GND
2 RXD –
3 TXD +
4 GND
5
6
GND
7 RXD +
8 TXD –
9 FRAME GND
NC
1
2
3
4
5
6
7
8
RXD –
GND
TXD –
RXD +
TXD +
COM
CONTROLLER
(CONTROL IN IP/RP)
1 2 3 4 5
9 8 7 6
1.......8
Pin No. Signal Pin No. Signal
AV-HS450N
AW-HE100N, AW-PH405N, AW-PH360N
: Twisted pair cable
When the AW-HE100N is to be connected to the unit, select a setting which will enable operations to be
controlled by the controller in the “Controller” item of the AW-HE100N’s pan-tilt head unit setting menu ( Pan
Tilt Head Setting ).
For further details, refer to the Operating Instructions of the AW-HE100N.