Panasonic AV-HS450N - Manual (Page 56)

56
3. Basic operations
Step 4
After steps 1 to 3 have been carried out, noise will still
remain in the detail areas such as the subject's hair as
shown in the image on the right.
If there are many areas with noise, the noise is removed by
carrying out this step several times.
If there are few areas with noise, adjust the noise using the
Spill(+) item and Spill(-) item of the Sample2 sub menu.
Turn [F2] to select “Cmpsit” using the View item.
Turn [F3] to select “Spl.Spg” using the Mode item.
<Menu display>
CHRKEY 2|View |Mode | |UNDO↓
Sample1 | Cmpsit|Spl.Spg| |
Using the positioner, move the position of the sample marker to the position of the remaining noise.
To change the size of the sample marker, turn the rotary encoder [Z].
If the sample area that has been set is acceptable, press the rotary encoder [Z].
The noise in the area that has been set is now removed, and the colors become more natural.
To return to the pre-sampling status after sampling has been executed, press [F5].
The number of operations that can be undone is one only.
 Execute sampling in both the light and dark areas as the sample area.
 If the noise in the foreground image is not completely removed by carrying out the steps above, proceed with
the FineTun sub menu operation.