Panasonic AV-HS450N - Manual (Page 132)

132
5. System settings
5-2. Setting the crosspoints
5-2-1. Assigning signals to the crosspoints
External video input signals and internally generated signals can be assigned to crosspoint buttons 1 to 32.
Displaying the assignment statuses
Press the [XPT] button to light its indicator and display the XPT menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the Stats1-4 sub menu.
The status of the assignment is displayed. The names of the assigned signals are abbreviated on the display.
<Menu display>
XPT 1|XPT : 1 2 3 4 5 6 7 8
Stats1 |SIG : BK 1 2 3 4 5 6 7
When one of the crosspoint buttons 1 to 32 is held down for a long time, the name of the signal assigned is
displayed on the LCD while the button is held down.
Example: When crosspoint button 1 is pressed (when the INPUT1 signal has been assigned to this button)
XPT 1|XPT : 1
Stats1 |SIG :IN1
“SHIFT” will be displayed for XPT16 when the SHIFT function has been assigned to the crosspoint 16 button.
Assigning signals to the crosspoints
Press the [XPT] button to light its indicator and
display the XPT menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the XPTAsign sub menu.
Turn [F2], select the crosspoint button using the
XPT item, turn [F3] and select the input signal
using the Signal item.
Changing the current assignment of the signals
selected by the crosspoint buttons will cause
the positions of the lighted crosspoint buttons
to change to correspond with the assignment
change. The images output at this time will remain
unchanged.
<Menu display>
XPT 5|XPT |Signal |Shift |Sf-Lock
XPTAsign| —| —| Right| Off
1~32 IN1~16
IN-A1
IN-A2
IN-B1
IN-B2
Black
CBGD
CBAR
FMEM1~4
PGM
PVW
KeyOut
CLN
MV1,MV2
NoAsign
Off
Left On