Panasonic AV-HS450N - Manual (Page 98)

98
4. Input/output signal settings
4-1-2. Setting the input mode
The mode can be set for each input only when HD has been selected as the system format.
When SD is selected as the system format, the input mode is always the same as Normal.
Normal: Input signals in conformity with the system format take effect.
D by D: When SD signals with the same frame rate as the system format have been input, they are input on a
dot by dot (1  magnification) basis with no up-conversion.
(This setting is only possible when the system format is 1080i.)
In this mode, there is minimal deterioration in the image quality and, as such, the mode is used to
combine SD format material using the PinP function.
UC: When SD signals with the same frame rate as the system format have been input, they are
up-converted.
Auto: Input signals in conformity with the system format take effect.
Furthermore, if SD signals with the same frame rate as the system format are input when HD is
selected as the system format, they are up-converted.
 In the Auto mode, the images may be disturbed when the input signals are switched.
On the INPUT XX sub menu, turn [F4] to set the input mode using the Mode item, and press the [F4] switch
to enter the setting.
An asterisk () appears at the left of the input mode currently selected.
<List of input modes supported>
System Mode
Input
480
/59.94i
576
/50i 1080
/59.94i
1080
/50i
1080
/24psf
1080
/23.98psf
720
/59.94p
720
/50p
SD 480/59.94i —        
576/50i —        
HD 1080/59.94i Normal        
DbyD        
UC        
Auto  (UC)       
1080/50i Normal        
DbyD        
UC        
Auto   (UC)      
1080/24psf Normal        
DbyD        
UC        
Auto        
1080/23.98psf Normal        
DbyD        
UC        
Auto        
720/59.94p Normal        
UC        
Auto  (UC)       
720/50p Normal        
UC        
Auto   (UC)      
  denotes a black screen.
 The UC mode or Auto mode cannot be selected for inputs 1 to 4.
 If D by D, UC or Auto mode is selected, the frame synchronizer will be turned on.
 The input mode cannot be changed when freeze is set to on.