Panasonic AV-HS450N - Manual (Page 127)

127
4. Input/output signal settings
4-8-4. Changing the material names
Change the names of the INPUT1 to 20 materials that are to be set on the multi view display.
The default settings, preset settings or user settings can be selected for these names.
When the preset settings and user settings are established, the material name (CAM1, etc.) display format is
used.
<Menu display>
INPUT XX|Name |Type↓ | |
| 3/13 |
 Defalt| |
Preset
User
Press the [INPUT] button to light its indicator and
display the INPUT menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the INPUT XX sub menu.
(X: IN1 to IN16, A1, A2, B1 or B2)
The signal with the material whose name is to be
changed is selected for X.
Turn [F2] to display the Name sub menu.
Turn [F3] to select the type of material name using the Type item, and press the [F3] switch to enter the type.
An asterisk () appears at the left of the type of material name currently selected.
Defalt: The default settings for INPUT1 to INPUT16, INPUTA1, INPUTA2, INPUTB1 and INPUTB2 are
selected.
Preset: The material names and number provided ahead of time are selected.
User: The material names are set using 7 characters.
If the Type item setting is changed when “Preset” or “User” is selected, the previously provided material
names will be lost.
Preset type setting procedure
On the Name sub menu, turn [F3] to select “Preset”
using the Type item.
Turn [F4] to select the material name using the
Name item.
Turn [F5] to select the material number using the
NO. item, and press the [F5] switch to enter the
number.
<Menu display>
INPUT XX|Name |Type↓ |Name |NO.(  )↓
| 3/13 |  Preset| CAM  | 1
C 
CG 
CGV 
CGK 
PC 
V 
VTR 
VCR 
1~9
User type setting procedure
<Menu display>
INPUT XX|Name |Type↓ |Name | (■)↓
| 3/13 |
 User| ■AM8| C
On the Name sub menu, turn [F3] to select “User”
using the Type item.
Turn [F4] to move the “” cursor to the position of
the character to be changed using the Name item.
Turn [F5] to select the character, and press the [F5]
switch to enter it.
Set all the characters in the material name by
repeating steps  and .