Image transmission functions, Specifications, Connections – Panasonic AV-HS450N User Manual
Page 158: Lan cable
158
7. Image transmission functions
This unit comes with a function for transmitting still images from the host computer to the unit via LAN and a
function for importing still images from the unit into the host computer. The image transmission software must be
installed in the host computer from the CD-ROM supplied in order to use these functions.
For details on installation, refer to “How to install the software”.
Specifications
Run the image transmission software (HS450 Tool) in a host computer which satisfies the following conditions.
• Operating system: Windows 2000 or Windows XP
• Processor:
Pentium III, 1 GHz or better recommended
• RAM:
256 MB or more recommended
• Hard disk drive:
At least 50 MB of free memory
• LAN:
100BASE-TX/10BASE-T
• Display:
TrueColor (24 bit, 32 bit color), 800
600 dots or more
The image formats supported include bitmap (bmp), JPEG (jpg), TIFF (tif), GIF (gif) and PNG (png).
The image transmission software is equipped with a function for automatically converting images into the specified
video format size.
Connections
Connect the LAN connector on the mainframe to the host computer using the LAN cable. The LAN connector
comes with an Auto-MDI/MDI-X function. Use a LAN straight cable or LAN crossover cable for the connection.
For details on network setup such as IP addresses, refer to “5-5. Network settings”.
IN2
SIGNAL
GND
REF
EDITOR
COM
TALLY/GPI
PANEL
LAN
2
3
4
5
6
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
C/C
U/C
1
SDI OUTPUTS
SDI INPUTS
DVI-D OUTPUTS
IN/OUT B2
IN/OUT B1
SLOT B
IN/OUT A2
IN/OUT A1
SLOT A
LAN cable