Panasonic AV-HS450N - Manual (Page 128)

128
4. Input/output signal settings
4-8-5. High-resolution multi view mode
When the system mode is set to SD, the DVI-D output can be output in high resolution.
If this is the case, MV1 is set for OUT5, and MV2 for OUT6.
MV1 and MV2 cannot be set for any other outputs.
 These settings can be established when SD serves as the system mode.
Press the [SYSTEM] button to light its indicator and display the SYSTEM menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the Format sub menu.
<Menu display>
SYS 1|Mode↓ |HiRes↓ |16:9SQ
Format |
 1080/59.94i|  Off| Off
1080/50i
1080/24psf
1080/23.98psf
720/59.94p
720/50p
480/59.94i
576/50i On On
 Turn [F4] to set On or Off using the HiRes item, and press the [F4] switch.