Panasonic AV-HS450N - Manual (Page 89)

89
3. Basic operations
3-11. Frame memories
Still images can be stored in the unit’s four internal frame memories for use.
The still images are transferred to the frame memories through the AUX bus and an SD memory card.
Conversely, the images in the frame memories can be transferred to an SD memory card.
Images in the frame memories can be used as bus images by assigning FMEM1 to FMEM4 using the crosspoint
assignment function.
Data for images stored in the frame memory can be retained even when the power is turned off, by saving them in
the flash memory area built into the mainframe.
3-11-1. Transferring images from the AUX bus
Press the [FMEM] button to light its indicator and display the FMEM menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the AUX sub menu.
<Menu display>
FMEM 1|FMEM |Select |Review |Exec↓
AUX | FMEM1| AUX1| Off|
FMEM1~4 AUX1~4 On
Turn [F2] to select the frame memory in which to store the image using the FMEM item.
Turn [F3] to select the AUX bus from which to transfer the images using the Select item.
Turn [F4] to select on or off for the review display setting using the Review item.
On: After the image has been imported, the images in the frame memory (FMEM1 to FMEM4) selected
for the AUX bus are displayed (for 2 seconds).
Even during review display, the next image can be imported.
Off: No review display.
Press the [F5] switch (Exec) to import the still images to the frame memory.
The still images can also be imported using the user buttons.
“StrFM1” to “StrFM4” have been allocated to the user buttons (
 See “5-3-1. Setting the user buttons”.), and
when one of these buttons is pressed, it will light for an instant, and the still image is then imported.
PGM
FMEM1 FMEM2
AUX
PGM
INPUT1 INPUT2 INPUT3 INPUT4
INPUT5 INPUT6 FMEM1 FMEM2
AUX
PGM
FMEM2
AUX
PGM
INPUT1 INPUT2 INPUT3 INPUT4
INPUT5 INPUT6 FMEM1 FMEM2
AUX
1 2 3
4 5 6
USER
Importing to FMEM1
Review display
Imported still image