Panasonic AV-HS450N - Manual (Page 143)

143
5. System settings
 Control using the GPI input port
Assign Item Description of function assigned Control method
AUTO AUTO button in transition area
Operations are performed using
contact inputs (30ms or more).
CUT CUT button in transition area
DSK1 DSK1 button in transition area
DSK2 DSK2 button in transition area
PinP1 PinP1 button in transition area
PinP2 PinP2 button in transition area
FTB FTB button in transition area
BGDAUTO AUTO button when the background is selected
BGDCUT CUT button when the background is selected
KEYAUTO AUTO button when the key is selected
KEYCUT CUT button when the key is selected
RTlyDBL Red tally signal is not output Functions are enabled using contact
inputs (or disabled in open status).
GTlyDBL Green tally signal is not output
NoAsign No function assigned
 Output from the GPI output port
Assign Item Description of function assigned Output
CUT Cut transition executed
Low pulses are output
(approx. 50 to 60 ms).
KEYON Key transition start
DSK1ON DSK1 transition start
DSK2ON DSK2 transition start
PinP1ON PinP1 transition start
PinP2ON PinP2 transition start
FTBON FTB transition start
BGDCUT Cut transition for the background executed
KEYCUT Cut transition for a key executed
AUTO Auto transition execution in progress
A low level is output.
BGDAUTO Auto transition execution in progress for background
KEYAUTO Auto transition execution in progress for key
KEYTRN Transition execution in progress for key
DSK1TRN Transition execution in progress for DSK1
DSK2TRN Transition execution in progress for DSK2
PinP1TRN Transition execution in progress for PinP1
PinP2TRN Transition execution in progress for PinP2
FTBTRN Transition execution in progress for FTB
R-Tly1 to 20 Red tally for INPUT1 to 20 A low level is output during tally
output.
G-Tly1 to 20 Green tally for INPUT1 to 20
NoAsign No function assigned