Panasonic AV-HS450N - Manual (Page 94)

94
3. Basic operations
3-12-3. Loading data from SD memory cards
Insert the SD memory card on which the data is stored into the SD memory card slot.
Load the file after its data has been stored in the each folder.
Data stored in other folders will not be recognized by the unit.
System data: “HS400\SETUP” folder
Still image data: “HS400\IMAGE” folder
On the SDCard menu, turn [F1] to display the File sub menu.
Turn [F2] to select “Load” using the Mode item, and then press the [F2] switch.
<Menu display>
SDCard 1|Mode↓ |Select |LoadFile Exec↓
File |
 Load| —| HS001
FMEM1~4
SetUp
Turn [F3] to select the transfer destination using the Select item.
Using the LoadFile item, turn [F4] to select the name of the file to be loaded.
If the name of the file to be loaded consists of more than 8 characters, a shortened version of the filename
will be displayed.
If the [F5] switch is now pressed, the file is loaded from the SD memory card and stored in the unit’s internal
memory.
While the file is being loaded, the following message and filename are displayed.
SDCard 1|∙∙∙Loading File∙∙∙
File | HS001
 Up to 999 files can be loaded.
 The following alphanumerics and symbols can be used as the characters for filenames (see below).
Files using other characters will not be displayed by the unit.
<Characters which can be used for filenames>
A to Z, a to z, 0 to 9, Space, ! # $ % & ' ( ) - . @ ^ _ ` { }