Panasonic AV-HS450N - Manual (Page 115)

115
4. Input/output signal settings
4-4. Setting the DVI output signals
(OUT5 and OUT6 standard outputs and options)
Set the DVI output signals of the OUT5 and OUT6 standard outputs and the DVI output signals if the DVI/analog
output board (option) has been connected.
<Menu display>
OUTPUTYY|DVIOut |Mode |Size↓ |Scale↓
| 2/2 |
 Dig|  Auto|  Fit-V
Ana XGA
WXGA
SXGA
WSXGA+
UXGA
WUXGA
Fit-H
Full
Press the [OUTPUT] button to light its indicator
and display the OUTPUT menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the OUTPUTYY sub menu.
(Y: OUT5, OUT6, A1, A2, B1 or B2)
The output that supports the DVI signal is selected
for Y.
Turn [F2] to display the third menu of DVIOut.
Turn [F3] to select the signal system using the Mode item, and press the [F3] switch to enter the selection.
 Set this when the DVI/analog input board (AV-HS04M5) has been connected.
Dig: DVI digital signals are output from the DVI connector.
Ana: DVI analog signals (RGB) are output from the DVI connector.
When “Ana” has been selected, the display position of the image may be off depending on the
monitor which is connected. If it is off, adjust the position at the monitor.
For details on the adjustment method, refer to the operating instructions of the monitor.
Turn [F4] to select the resolution of the images to be output, and press the [F4] switch to enter the selection.
Auto: The equipment information of the output destination is captured by the DVI signals, and
the images are output at the optimum resolution. (The vertical frequency is 60 Hz, and
the maximum resolution is SXGA for analog output signals and WUXGA for digital output
signals.)
If the equipment information cannot be captured or if the resolution and frequency which
can be output by the product are not contained in the equipment information, the images
will be output at the XGA setting.
XGA: The images are output at the 1024 768 resolution and 60 Hz frequency.
WXGA: The images are output at the 1280 768 resolution and 60 Hz frequency.
SXGA: The images are output at the 1280 1024 resolution and 60 Hz frequency.
WSXGA+: The images are output at the 1680 1050 resolution and 60 Hz frequency.
(This can be selected only when digital signals are output.)
UXGA+: The images are output at the 1600 1200 resolution and 60 Hz frequency.
(This can be selected only when digital signals are output.)
WUXGA: The images are output at the 1920 1200 resolution and 60 Hz frequency.
(This can be selected only when digital signals are output.)
1080/59.94P: The images are output at the 1920 1080 resolution and 59.94 Hz frequency.
(Only OUT5 and OUT6 can be selected.)
1080/50P: The images are output at the 1920 1080 resolution and 50 Hz frequency.
(Only OUT5 and OUT6 can be selected.)