Panasonic AV-HS450N - Manual (Page 153)

153
5. System settings
5-9. Initialization
5-9-1. Initializing Setting Data
Initialization returns the set data to the factory shipment status.
(The network settings and the date and time settings are not initialized.)
Press the [SYSTEM] button to light its indicator and display the SYSTEM menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the Initial sub menu.
<Menu display>
SYS 6|Init↓ |F Init↓| |
Initial | | | |
Press [F2] to initialize the settings. The “Init?” message appears.
To initialize the settings, turn [F2] to select YES, and then press the [F2] switch.
To cancel the initialization, turn [F2] to select No, and then press the [F2] switch.
<Menu display>
SYS 6|Init↓ |F Init↓| |
Initial | No| | |
YES
5-9-2. Initializing Fader
The range for executing a transition can be initialized by operating the fader lever.
Initialization should be performed when transitions are not completed to the end even when the fader lever has
been moved as far as it will go.
Press [F3] in the Initial sub menu to perform initialization.
The "F Init?” message is displayed.
<Menu display>
SYS 6|Init↓ |F Init↓| |
Initial | | No| |
YES
When initializing, turn [F3] to select “Yes” and press the [F3] switch.
When not initializing, turn [F3] to select “No” and press the [F3] switch.