Panasonic AV-HS450N - Manual (Page 86)

86
3. Basic operations
3-10-3. Recalling the operations stored in the memory (Recall)
1 2 3
4 5 6
7 8 9
10 XPT DSBL EFF DSLV
WIPE
SQ1 SQ2
SL2 SL1
3D1 3D2
PAGE
STOR
DEL
UNDO
BKGD
WIPE
MEM
RE
CALL
SHOT
MEM
PinP
MEM
CAM
MEM
BKGD
PATT
KEY
PATT
1 2
4
3
5 6
7 8 9
10 12
MEMORY / PATTERN
11
Recall
Press one of the buttons — [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] — to select the
corresponding memory whose operations are to be recalled.
The selected button lights in amber.
Depending on the operation that was performed last, the [STOR] button, [RECALL] button or [DEL] button
lights.
Press the [RECALL] button. The [RECALL] button lights in amber.
The button of the number key containing the stored operations lights in green (or in amber with the AW
system).
 However, it will not light if [CAM MEM] has been selected.
Press the number key (1 to 10) whose stored operations are to be recalled.
 The items of the selected memory unit are targeted as the stored operations that will be recalled.
 Refer to “3-10-1. Memory registration and recall items”.
When another number button is pressed, the memory items stored in the pressed button will be recalled.
As soon as the stored operation that has been recalled is played, the [UNDO] button becomes operable, and
it lights in amber.
If the [UNDO] button is pressed while it is lighted, the status before the stored operation is played will be
restored.
 When the [CAM MEM] button is selected, the [UNDO] button will have no effect so it will not light.
 The [CAM MEM] button uses the preset numbers stored in the pan-tilt heads.
Bear in mind that if the preset details have been changed at the pan-tilt head after a preset number was
stored using the [CAM MEM] button, it will be the changed details that will be recalled.
To exit memory recall, press the [STOR] button or [SHOT MEM] button.
XPT DSBL
When number key No.11 [XPR DSBL] is pressed while a stored operation is playing, it will light in amber. When
the [RECALL] button is now pressed, the selected materials of the PGM/A bus, PST/B bus, KEY bus, PinP1/2 bus
and DSK1/2 bus will be excluded from the target for stored operations.
 The number key No. 11 [XPT DSBL] will not light when the [CAM MEM] button is selected, as the operations of
the key are disabled.