Panasonic AV-HS450N - Manual (Page 88)

88
3. Basic operations
3-10-5. Effect dissolve
Switching from the current image to the image or operation stored in the SHOT memory can be performed
smoothly.
For the items targeted by effect dissolve, refer to the SHOT memory items in “3-10-1. Memory registration and
recall items”.
Press the [SHOT MEM] button, and then press the [RECALL] button.
Press number key No.12 [EFF DSLV] to enable effect dissolve.
When the function is enabled, the number key No.12 [EFF DSLV] lights in amber.
Press the number key (1 to 10) containing the stored operation.
The switching from the current image to the stored operation recalled by pressing the number key is
performed smoothly. The time taken for the change is set on the EFF DSLV sub menu of the TIME menu.
 Refer to “2-1-5. LCD menu area”.
<Menu display>
TIME 8|TransTime |Unit |
EFF DSLV| 1s| 0f| Sec|
0~13S 0~999f Frame
Pressed number keys blink in green (or in amber with the AW system) while the operation switching is under
way.
When the operation switching has been completed, the pressed number key lights in amber (or in green with
the AW system).
 When number key No.12 [EFF DSLV] is pressed at any point during the operation switching, the switching is
canceled, and switching is initiated to the operation of the number key that was selected at that instant.
 During the operation switching, the operation of the fader lever is canceled.
 During the operation switching, other stored operations cannot be recalled.
 When initiating PinP1/2 and DSK1/2 transitions, the switching process is not stored in the memory.
 The number key No.12 [EFF DSLV] will not light when the [CAM MEM] button is selected, as the operations
of the key are disabled.