Panasonic AV-HS450N - Manual (Page 43)

43
3. Basic operations
3-3-4. Wipe decorations (border, soft effect)
A border effect or soft effect can be added to the wiping of background transitions.
Setting the border and soft effect
Press the [BKGD] button to light its indicator, and display the BKGD menu.
 Refer to “2-1-5. LCD menu area”.
<Menu display>
BKGD 1|Border | Width| Soft|
Border | Off| 5.0| 0.0|
On 0.1
|
100.0
0.0
|
100.0
Turn [F1] to display the Border sub menu.
Turn [F2] to set On (or Off) for the border using the Border item.
Turn [F3] to set the width of the border using the Width item.
Turn [F4] to set the amount of soft effect using the Soft item.
When “On” has been selected as the Border item setting, the ratio of the soft effect to the border width is
indicated as the amount of soft effect.
When only the soft effect is to be added to wipe, select “Off” as the Border item setting.
Setting the border color
On the BKGD menu, turn [F1] to display the BodrCol sub menu.
<Menu display>
BKGD 2|Hue |Sat |Lum |Load↓
BodrCol | 0.0| 0.0| 100.0| White
0.0
|
359.9 0.0
|
100.0 0.0
|
108.0 Yellow
Cyan
Green
Magenta
Red
Blue
Black
Turn [F2], [F3] and [F4] to adjust the Hue, Sat and Lum of the border color.
 To call the preset color
Turn [F5] to select the preset color using the Load item, and press the [F5] switch.
The Hue, Sat and Lum values are changed to the preset color values.
 To save the values that were set before calling the preset color, refer to “3-10. Preset memory”.