Panasonic AV-HS450N - Manual (Page 87)

87
3. Basic operations
3-10-4. Deleting the operations stored in the memory (Delete)
1 2 3
4 5 6
7 8 9
10 XPT DSBL EFF DSLV
WIPE
SQ1 SQ2
SL2 SL1
3D1 3D2
PAGE
STOR
DEL
UNDO
BKGD
WIPE
MEM
RE
CALL
SHOT
MEM
PinP
MEM
CAM
MEM
BKGD
PATT
KEY
PATT
1 2
4
3
5 6
7 8 9
10 12
MEMORY / PATTERN
11
Press one of the buttons — [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] — to select the
corresponding memory whose operations are to be deleted.
The selected button lights in amber.
Depending on the operation that was performed last, the [STOR] button, [RECALL] button or [DEL] button
lights.
Press the [DEL] button.
The [DEL] button lights in red.
The button of the number key containing the stored operations lights in green (or in amber with the AW
system).
 However, it will not light when [CAM MEM] is selected.
Hold down (for about 2 seconds) the number key (1 to 10) used to delete the stored operations.
The button of the pressed number key goes off.
As soon as the stored operations are deleted, the [UNDO] button becomes operable and lights in amber. If
the [UNDO] button is pressed while it is lighted, the status before the stored operation was deleted will be
restored.
The [CAM MEM] button deletes specified preset numbers registered in the pan-tilt heads.
 When the [CAM MEM] button is selected, the [UNDO] button will have no effect so it will not light.
To exit memory delete, press the [DEL] button or [SHOT MEM] button.