Panasonic AV-HS450N - Manual (Page 96)

96
4. Input/output signal settings
4-1. Input signal settings
IN1 to IN6 are SDI signal inputs.
IN A1, IN A2, IN B1 and IN B2 can be set only when one of the following option boards has been connected.
 AV-HS04M1 (SDI Input Board)
 AV-HS04M2 (Analog Input Board)
 AV-HS04M3 (DVI Input Board)
 AV-HS04M6 (Analog Composite Input Board)
 AV-HS04M8 (Full-HD DVI Input Board)
<List of settings by input signal>
Input connector
Setting menu and numbers of sections in this manual
FS Mode Freeze ColCor UpConv
4-1-1 4-1-2 4-1-3 4-1-4 4-1-5
IN1 to IN8
Standard
SDI input 16 lines

Only DbyD
selectable
 — —
IN9 to IN16    —
IN13 to IN16     
Option slot
IN A1,
IN A2,
IN B1,
IN B2
AV-HS04M1
SDI input 2 lines
   — 
AV-HS04M2
Analog component input 2 lines
   — 
AV-HS04M3
DVI-I input 2 lines
— —  — —
AV-HS04M6
Analog composite input 2 lines
   — 
AV-HS04M8
DVI-D input 2 line
— —  — —
Input connector
Setting menu and numbers of sections in this manual
AnaGain Setting
DVIIn
(Dig)
DVIIn
(Ana)
4-1-6 4-1-7 4-2 4-2
IN1 to IN8
Standard
SDI input 16 lines
— — — —
IN9 to IN16 — — — —
IN13 to IN16 — — — —
Option slot
IN A1,
IN A2,
IN B1,
IN B2
AV-HS04M1
SDI input 2 lines
— — — —
AV-HS04M2
Analog component input 2 lines
 — — —
AV-HS04M3
DVI-I input 2 lines
— —  
AV-HS04M6
Analog composite input 2 lines
  — —
AV-HS04M8
DVI-D input 2 line
— —  —
: Can be set.
—: Cannot be set.